무제목

Power RAID N+1 redundancy through a new power sharing technology.
Power sharing means that all of the modules in a Power RAID run in parallel and share the load evenly.
N+1 redundancy means running one extra module than will support you full load.
In thisway, all the modules support one another.
N+1 redundancy is used in disk arrays, in processor power supplies, and in processor themselves.
But until now, redundancy has never been offered for server level power protection.
As critical applications and database are moved to smaller machines, the Power RAID brings glass house reliability to the mid-sized power protection range.

The Outline of N plus 1 Power RAID Redundant

For the improvement of UPS reliability and the safety of power loaded parts, the N+1 Power RAID Redundant System is capable of supporting standby of back-up equipment.

Existed high power rated UPS is designed to provide all loaded computers with uninterrupted power.

As a type of Power RAID System, the N+1 Power RAID Redundant System comes with a independently operating each power volume-rated supplier which can continue to make non-stop power supply in case of the load failure of existed power supplying device.

With separately operating suppliers like this, the N+1 Power RAID Redundant System is focused on the maximized role of the unit power-supplying and the safeguard in power control.

Many Advantages of N plus 1 Power RAID(Redundant Array Inexpensive Dispense) redundant

Reduced Power Loss in comparison with parallel models due to usually power-unloaded status of Redundancy RAID UPS.

The Power RAID Redundant type is contributed to economically reduce loss and make time-saving through independently operating power load lines because all user have to do is cutting the line of error device out. It is no need to make power-down of the other normal equipment.

The Power RAID Redundancy has basic advantage of rotecting both UPS and power load through by-pass connection of all power load lines in the midst of readjusting UPS module with by-pass function for repairing. This aims to minimize customers' overall loss in after service. In general, the other or parallel type UPS comes merely with one connecting line between parallel UPS module and power load line. And it is used mainly for old buildings connected by limited lines.

On the contrary, the Power RAID Redundant type UPS devices provide more excellent reliability than parallel type models. It is not only because each independent line does not affect the other load line, bat because the electrically power loaded line can be also transferred to the other normal module temporary or permanently when repairing or making maintenance of already inactivated module.

Furthermore, if is free from electrical risk because it is available to separately repair each electric power line even when handling power output line.